Setting The Channel On Your Rugby/Football Scoreboard

Each Scoreboards Online rugby/football scoreboard has to talk to its controller through a radio frequency channel. These can be set are most commonly used when using multiple different scoreboards in a small area.

Once this has been set you should not need to change it again.

If you do not have the Timer Module on your scoreboard:

1. Make sure both the scoreboard and the controller are on
2. Use the following combinations to set the channel
   1. Channel 0 (Default): FN & Home +5
   2. Channel 1: FN & Home + 3
   3. Channel 2: FN & Away + 5
   4. Channel 3: FN & Away + 3
3. The scoreboard will display ‘CH’ in the home score. This will then disappear and you are good to go

If you do have the Timer Module on your scoreboard:

1. Make sure both the scoreboard and the controller are on
2. Use the following combinations to set the channel
   1. Channel 0 (Default): FN & Home -1
   2. Channel 1: FN & Home +1
   3. Channel 2: FN & Away -1
   4. Channel 3: FN & Away +1
3. The scoreboard will display ‘CH’ in the home score. This will then disappear and you are good to go